Technical Description
Face Shield composed of a visor made of green polycarbonate, approximately 240 mm in height and 360 mm in width, fixed with a tilting support made of aluminum in an arched shape, secured through 3 aluminum pins. Attached to the helmet via a channel and a metal spring that passes through the back of the helmet shell and keeps the support fixed in place. The Face Shield is used with Class A Safety Helmet, LEDAN Model 820 – C.A: 35.831 – Ledan Indústria e Comércio Ltda.
LEDAN Celeron Model 820 Helmet
Aluminum tilting support
Green polycarbonate Face Shield
Standard
ANSI/ISEA Z87.1-2015 – Z87+U6L5R5
Application
This equipment should be used solely for protecting the user’s skull, face, and eyes against the following risks: impact from multidirectional flying particles, infrared radiation, and intense luminosity. Additional partial body protection might be necessary depending on the work being performed.
In the event of accidental spills of chemicals and flammable liquids onto the protective equipment, the user must immediately and carefully remove them, ensuring the liquid does not come into contact with the skin.
In case of accidental splashes of molten metal, the user should immediately leave the workstation and remove the equipment. When the garment in question is in direct contact with the skin, it may not eliminate all risks of burns.
SUPREMA dode
4520
Approval dertificate
High-Temperature Face Shield: 43.918
Test report (T.R.)
1114221-203
Customization
Aluminum swivel support with 3 pins.
Plastic label attached to the product.
Cleaning instructions
The Personal Protective Equipment must be cleaned according to the manufacturer’s recommendations and then visually inspected to ensure no damage has occurred.
This material should be cleaned only with a damp cloth and water, without any chemical compound.
Attention
This equipment is disposable; at the first signs of deterioration, it should be replaced (do not reuse).
This equipment does not contain toxic substances or have suspected harmful effects.
All safety equipment aims to protect the user from the risks they were designed for.
Carefully check if this model meets safety requirements.
Store the equipment in well-ventilated areas, away from heat or moisture.
Transmittance requirements
Mark the option regarding optical protection.
[ ] Basic requirements for clear lenses (applicable only to lenses with transmittance > 85%)
[X] Protection against ultraviolet radiation (marking “U”)
[X] Protection against visible light (marking “L”)
[X] Protection against infrared radiation (marking “R”)
[ ] Welding protection (marking “W”)
[ ] Lenses for special purposes (marking “S”) (transmittance value lower than clear lenses but does not meet other designated optical protection criteria above).
Incorrect use
The level of flame protection will be reduced if the welding protection equipment is contaminated with flammable materials.
An increase in the oxygen volume in the air will significantly reduce the equipment’s flame protection. Caution should be exercised when welding in confined spaces.
The electrical insulation provided by the equipment will be reduced when it is wet, dirty, or soaked in sweat.
The equipment is intended for use in addition to other protective clothing, providing preservation against welding damage.
This equipment consists of 3 (three) parts: helmet, swivel support, and face protector.
Do not use the equipment separately, altering its original configuration.
